Load coincidence
The input, risk and verification method are documented in the proposal and design.
Business
Business energy resilience
POS, communications, refrigeration and production equipment run in a defined priority order.
Size this configurationWho it is for
When this solution fits
Scope of work
- Consumption profile and downtime cost
- Priority backup stages and scalable storage
- Grid / battery / solar / generator scenarios
- Service plan and incident log
Before the quotation
What we verify before selecting equipment
Refrigeration compressors
The input, risk and verification method are documented in the proposal and design.
Grid quality
The input, risk and verification method are documented in the proposal and design.
Proposal format
Three options based on the same input data.
Sufficient
Covers the defined critical loads without future capacity.
Balanced
Includes an operating reserve and a balanced storage size.
Expandable
Allows compatible future batteries, PV or additional loads.
Example estimate
A typical scenario in numbers
Peak 12 kW · average 4 kW · backup 6 h
Use your own numbersInverter from15 kW
Recommended battery32.5 kWh
Minimum battery29 kWh
Critical energy24 kWh
A preliminary estimate using the calculator formula (90% DoD, 92% efficiency, 10% ageing reserve). Not a commercial offer.
Common questions
What Kyiv and Sumy customers ask
01What should a shop or café back up first?
Tills, communications, security systems and refrigeration — ordered by the cost of downtime. We build priority stages so a limited battery keeps the most expensive processes running longest.
02Refrigeration compressors start simultaneously — is that a problem?
Simultaneous compressor starts create current peaks the inverter must survive. We measure the consumption profile and stagger the starts with staged control; this is fixed in the design.
03Do you attend sites in Kyiv and Sumy?
Yes, we serve Kyiv, Sumy and the surrounding regions. An initial assessment can often be done remotely from panel photos and electricity bills; a site visit is agreed at the audit stage.
Next step
Start with a preliminary system estimate.
Get an indicative configuration immediately. The engineering quotation is prepared after the site data has been verified.